Rover 2000 Pre Wired Power System Board 2000W Inverter 40A AC & DC Charging, Battery Monitor & Power Distribution

Back Order - Expected to ship in 2-5 business days
Need it fast? Contact us to confirm lead times.
Pickup currently unavailable.

 
 

DETAILS


Overview

Charging and 240V,
on one pre-wired board.

Everything in the Rover 40 plus a 2000W Pro Series pure sine wave inverter with RCD and automatic mains transfer. Choose the Rover 2000, or the Rover 2000 Pro with our 8 way digital Bluetooth switch panel, from the drop-down above.

Every Rover board is assembled in Australia by qualified auto electricians, using our Pro Series components, and backed by a 5 year warranty and lifetime technical support.

Rover 2000 pre-wired power system board

Rover 2000 shown. The Pro board is taller, with the switching module on the board.

2000WPure Sine Inverter
40AAC Charging
40ADC-DC Charging
Optional8 Way Switching

Pre-wired and fused

Rover 2000 installed in a ute canopy

Rover 2000 fitted in a ute canopy.

Bolt it in and connect

Everything is mounted, wired and labelled on a heavy-duty board, so you only connect the battery, vehicle, solar and your loads. A 100A (150A on the Pro) heavy duty circuit breaker protects the main feed and the midi fuse block protects each circuit.

  • ✓Six fused circuits: vehicle input, solar input, DC-DC output, AC charger output and two load circuits
  • ✓100A (150A on the Pro) heavy duty circuit breaker
  • ✓Every circuit labelled on the board

Mains charging

40A Pro Series AC charger

Plug into 240V at home or a powered site and the multi-stage charger tops up your battery automatically. It has a dedicated lithium profile and a BMS wake-up button for lithium batteries that have gone to sleep.

  • ✓200–260V AC input, 14.4V output
  • ✓Lithium, AGM, Gel and lead acid profiles
  • ✓Fan cooled, rated for permanent install (TVD-AC40)
40A Pro Series smart battery charger

Vehicle and solar charging

40A Pro Series DC-DC charger

40A DC-DC with MPPT solar input

Charges your auxiliary battery while you drive, from standard or smart alternators, and from solar when you’re parked. Up to 500W of charging at 94% efficiency.

  • ✓11.6–18V alternator input, 12–28V solar input
  • ✓Ignition sense wire for smart alternators
  • ✓IP54 with internal silicone potting (TVD-DC40-PRO)

Know your battery

500A Bluetooth battery monitor

See voltage, current, state of charge and time remaining on the display or in the 12 Volt Direct app, so you always know how much power you have left.

  • ✓500A shunt, accurate under heavy loads
  • ✓Display on the board, or supplied loose on the Pro so you can mount it where you can see it
  • ✓Bluetooth app monitoring (TVD-BM500BT)
Bluetooth battery monitor with 500A shunt and app

240V power

2000W Pro Series pure sine wave inverter with RCD and mains transfer

2000W Pro Series pure sine wave inverter

Clean 240V for laptops, induction cooktops, coffee machines and power tools. Plug in at a powered site and the automatic mains transfer switches your 240V loads over to shore power.

  • ✓2000W continuous, 4000W surge
  • ✓Built-in RCD safety switch
  • ✓Automatic mains transfer, under 3% harmonic distortion

Pro option: digital switching

8 way Bluetooth switch panel

Choose the Rover 2000 Pro to add digital switching. Switch your lights, fridge, water pump and other 12V gear from one touch panel or from your phone, without a row of separate switches. The control module is pre-wired on the board, and the touch panel mounts in the cabin or wherever suits you.

  • ✓8 switched circuits, control module pre-wired on the board
  • ✓Control from the panel or the app on your phone
  • ✓Works on 12V and 24V (TVD-DSP-8BT)
8 way digital Bluetooth switch panel with app

Compatibility

  • ✓12V lithium (LiFePO4), AGM, Gel and lead acid batteries
  • ✓Vehicles with standard or smart alternators
  • ✓12V solar panels and blankets (12–28V input)
  • ✓Canopies, caravans, camper trailers and work vehicles

Not suitable for:

  • ✕24V systems

Tech specs

ModelRover 2000
System Voltage12V DC
AC Charger40A Pro Series, 200–260V AC input (TVD-AC40)
DC-DC Charger40A Pro Series, 500W, MPPT solar input (TVD-DC40-PRO)
Battery Monitor500A shunt, Bluetooth, display (TVD-BM500BT)
Inverter2000W pure sine wave, 4000W surge, RCD and mains transfer (TVD-IP2000-PRO)
SwitchingPro only: 8 way digital Bluetooth switch panel (TVD-DSP-8BT)
Protection100A (150A on the Pro) heavy duty circuit breaker, midi fuse block
Fused Circuits6
Board Size470 x 590 mm (Pro: 455 x 680 mm)
Battery TypesLiFePO4, AGM, Gel, lead acid
Assembled InAustralia
Brand12 Volt Direct
Warranty5 years, plus lifetime technical support

What’s included

Rover 2000 board

1 x Rover 2000 pre-wired board with:

  • ✓2000W Pro Series pure sine wave inverter
  • ✓40A Pro Series AC charger
  • ✓40A Pro Series DC-DC charger
  • ✓500A Bluetooth battery monitor with display (display supplied loose on the Pro)
  • ✓Midi fuse block with 6 fused circuits
  • ✓100A (150A on the Pro) heavy duty circuit breaker
  • ✓Pro only: 8 way digital Bluetooth switch panel (control module on the board, touch panel supplied loose)

Not included: battery, solar panel, battery and vehicle cables, the mega fuse and 50A inline fuse.

Simple installation

1Mount the board

Bolt the board to a wall or panel in your canopy, caravan or camper, close to the battery, with room around the chargers and inverter for airflow.

2Connect the vehicle and solar

Run the vehicle input from the start battery with a 50A midi fuse (8 B&S minimum, 6 B&S recommended for a 6 m run). Add the ignition sense wire for smart alternators, and plug in your solar panel or blanket.

3Connect the battery

Wire the board to your 12V battery. All negatives go through the shunt, never straight to the battery. Use 70 mm² cable and a 250A mega fuse for 2000W, or 95 mm² and 300A for 3000W (1.5 m run).

The board is pre-wired, so there are only a few connections to make. Cables, the battery and vehicle fuses, batteries and solar panels aren’t included. Have a qualified auto electrician do the vehicle and battery connections, and follow your local wiring rules.

Rover 2000 and Rover 3000 wiring diagram

Rover 2000 and Rover 3000 wiring diagram. For reference only; follow your local wiring rules.

Rover 2000: which one?

Both boards have the same inverter, chargers and battery monitor. Choose yours from the drop-down above.

Rover 2000Rover 2000 Pro
AC charger40A40A
Battery monitor displayOn the boardSupplied loose
Heavy duty circuit breaker100A150A
Pure sine wave inverter2000W2000W
8 way Bluetooth switch panel–✓
Board size470 x 590 mm455 x 680 mm

No 240V needed? See the Rover 20 & 40. Need more power? See the Rover 3000.

Frequently asked questions

Do I need an auto electrician?

The board comes pre-wired and labelled, so a handy DIYer can mount it. We recommend a qualified auto electrician for the battery and vehicle connections and the 240V side.

Does it work with smart alternators?

Yes. The 40A DC-DC charger has an ignition sense wire input for vehicles with smart (variable voltage) alternators.

What battery do I need?

Any 12V lithium (LiFePO4), AGM, Gel or lead acid battery. For the inverter, use a lithium battery whose BMS can supply at least 200A continuous for 2000W, or 250A for 3000W.

Can I add solar?

Yes. The DC-DC charger has a solar input (12–28V) with MPPT, so a 12V panel or blanket plugs straight in.

Is it in stock?

We usually keep Rover boards in stock. If yours needs to be built, allow 4–6 weeks. Contact us to check before you order.

Not sure what you need?

Tell us about your vehicle, battery and what you want to run, and we’ll help you pick the right Rover board.

Contact our team

Product Details

SKU TVD-PB-ROVER-2000-PARENT
Brand 12 Volt Direct

12 Volt Direct is a 12 V power specialist for the automotive, 4WD, caravan and off-grid industry. When 12V matters, trust the professionals. 12 Volt Direct was built around a simple idea: 12 V systems should be done properly. Its range is designed for the way Australians power their vehicles, carava...

Find Out More