Caravan Hot Water Anode Rod to suit Suburban HWS - Magnesium 28cm
In Stock - Ready for immediate dispatch or pickup
Pickup Available from Punchbowl, NSW
DETAILS
Overview
Stop rust before it
eats your hot water tank.
A replacement magnesium anode rod to suit Suburban caravan and RV hot water systems. The anode wears away instead of your steel tank, so a fresh one each year is the cheapest way to make your heater last.
28cm long for longer intervals between changes. Australian stock, ready to ship.

Save with the 2 pack

Grab a spare for next year
The anode is a yearly service item. The 2 pack costs much less per anode, so you have the next one ready in the van.
See the 2 packWhy change the anode
A small part that protects a heater worth far more
Suburban hot water systems use a steel tank with a glass lining. The magnesium anode corrodes on purpose so the tank does not. Once the anode is used up, the water starts on the tank itself, and a rusted-through tank means a new heater.
- ✓Check the anode at least once a year, more often with bore or hard water
- ✓Replace it before about 80% of the rod has worn away
- ✓Change it when you service the van or before a long trip
Compatibility
- ✓Most Suburban caravan and RV hot water systems
- ✓Suburban SW6DEA
- ✓Suburban SW6PA
- ✓Suburban SW6DA
- ✓Caravans, motorhomes, campervans and 5th wheelers
Not suitable for:
- ✕Truma and other brands of hot water system (check your heater manual)
- ✕Household hot water systems
Tech specs
| Product | Hot water system anode rod |
| Material | Magnesium |
| Rod Length | Approx. 28cm |
| Thread | Standard Suburban anode thread |
| Suits | Suburban SW6DEA Suburban SW6PA Suburban SW6DA Most other Suburban models |
| Barcode | 9359968001583 |
What’s included
- ✓1 x magnesium anode rod
Socket, thread tape and tools are not included.
Simple installation
Turn off the gas, 240V and water pump. Let the water cool, then open a hot tap to release the pressure.
Undo the old anode with a 27mm socket and let the tank drain. Flush out any scale.
Wrap the thread with plumber’s tape and tighten the new anode. Refill with a hot tap open until water runs, check for leaks, then turn the heater back on.
Never turn the heater on with an empty tank. Fill it first.
Frequently asked questions
How often should I replace the anode?
Check it every year. Replace it before about 80% has worn away. Bore water, hard water and heavy use wear it faster.
Will it fit my Suburban heater?
It suits most Suburban caravan hot water systems, including the SW6DEA, SW6PA and SW6DA. Compare it with your old anode if you are unsure.
Why magnesium?
Magnesium is the anode material used in Suburban steel tanks. It corrodes before the steel does, which is what protects the tank.
Do I need any tools?
A 27mm socket and some plumber’s thread tape.
Not sure what you need?
Tell us your hot water system model and we will check fitment before you buy. Buying for a fleet, caravan park or service centre? Ask us about quantity pricing.
Contact our teamProduct Details
| SKU | OZCA-08 |
| Barcode # | 9359968001583 |
| Brand | 12 Volt Direct |
| Shipping Weight | 0.3000kg |
| Shipping Width | 0.050m |
| Shipping Height | 0.050m |
| Shipping Length | 0.300m |
12 Volt Direct is a 12 V power specialist for the automotive, 4WD, caravan and off-grid industry. When 12V matters, trust the professionals. 12 Volt Direct was built around a simple idea: 12 V systems should be done properly. Its range is designed for the way Australians power their vehicles, carava...
Find Out More