2 Pack Anode Rods to suit Suburban Caravan Hot Water - Magnesium 28cm

In Stock - Ready for immediate dispatch or pickup
Order in for Dispatch Today
Pickup Available from Punchbowl, NSW

 
 

DETAILS


Overview

One for now,
one for next year.

Two replacement magnesium anode rods to suit Suburban caravan and RV hot water systems. The anode wears away instead of your steel tank, so fit one now and keep the spare in the van for the next service.

28cm long for longer intervals between changes. Australian stock, ready to ship.

2 pack of magnesium anode rods to suit Suburban caravan hot water systems
2 PackAnode Rods
MagnesiumSacrificial Anode
28cmRod Length
SuburbanHot Water Systems

Why change the anode

A small part that protects a heater worth far more

Suburban hot water systems use a steel tank with a glass lining. The magnesium anode corrodes on purpose so the tank does not. Once the anode is used up, the water starts on the tank itself, and a rusted-through tank means a new heater.

  • ✓Check the anode at least once a year, more often with bore or hard water
  • ✓Replace it before about 80% of the rod has worn away
  • ✓Change it when you service the van or before a long trip

Compatibility

  • ✓Most Suburban caravan and RV hot water systems
  • ✓Suburban SW6DEA
  • ✓Suburban SW6PA
  • ✓Suburban SW6DA
  • ✓Caravans, motorhomes, campervans and 5th wheelers

Not suitable for:

  • ✕Truma and other brands of hot water system (check your heater manual)
  • ✕Household hot water systems

Tech specs

ProductHot water system anode rod
MaterialMagnesium
Rod LengthApprox. 28cm
ThreadStandard Suburban anode thread
SuitsSuburban SW6DEA
Suburban SW6PA
Suburban SW6DA
Most other Suburban models
Barcode9359968001583

What’s included

  • ✓2 x magnesium anode rods

Socket, thread tape and tools are not included. Only need one? See the single anode.

Simple installation

1Make it safe

Turn off the gas, 240V and water pump. Let the water cool, then open a hot tap to release the pressure.

2Remove the old anode

Undo the old anode with a 27mm socket and let the tank drain. Flush out any scale.

3Fit and refill

Wrap the thread with plumber’s tape and tighten the new anode. Refill with a hot tap open until water runs, check for leaks, then turn the heater back on.

Never turn the heater on with an empty tank. Fill it first.

Frequently asked questions

How often should I replace the anode?

Check it every year. Replace it before about 80% has worn away. Bore water, hard water and heavy use wear it faster.

Will it fit my Suburban heater?

It suits most Suburban caravan hot water systems, including the SW6DEA, SW6PA and SW6DA. Compare it with your old anode if you are unsure.

Why magnesium?

Magnesium is the anode material used in Suburban steel tanks. It corrodes before the steel does, which is what protects the tank.

Do I need any tools?

A 27mm socket and some plumber’s thread tape.

Not sure what you need?

Tell us your hot water system model and we will check fitment before you buy. Buying for a fleet, caravan park or service centre? Ask us about quantity pricing.

Contact our team

Product Details

SKU ANODE-2PCS
Barcode # 0769807742994
Brand 12 Volt Direct
Shipping Weight 0.6000kg
Shipping Width 0.100m
Shipping Height 0.050m
Shipping Length 0.300m

12 Volt Direct is a 12 V power specialist for the automotive, 4WD, caravan and off-grid industry. When 12V matters, trust the professionals. 12 Volt Direct was built around a simple idea: 12 V systems should be done properly. Its range is designed for the way Australians power their vehicles, carava...

Find Out More