Bluetti Apex 300 Battery Tray Mount

In Stock - Ready for immediate dispatch or pickup
Order in for Dispatch Today
Pickup Available from Punchbowl, NSW

DETAILS

Overview

Bolt down.
Strap in.

A made-to-measure steel tray for your Bluetti Apex 300. Bolt it into the ute, van or camper, strap the unit in, and it stays put on the roughest roads.

Made-to-measure fitSized to the Apex 300 footprint, 540 x 340 mm.

Bolts down solid6 mm mounting holes through the base.

Strap slots built inSlots at each end for a tie-down strap.

Made for the Apex 300

This 12 Volt Direct tray is cut and folded to suit the Bluetti Apex 300 and Apex 300 stacked with B300K and/or B500K expansion batteries. The base sits flat under the unit and the folded sides stop it sliding around, so your power station rides in one spot instead of bouncing across the floor.

Mount it in the ute tub, canopy, drawer system, van or camper. It’s a simple, solid way to carry a power station without building a custom box around it.

Straps shown for illustration. Not included.

Compatibility

✓Bluetti Apex 300
✓Apex 300 stacked with B300K and/or B500K expansion batteries

Not suitable for:

✕Bluetti AC240P / AC200PL series – use TVD-BT03

Tech specs

Suits	Bluetti Apex 300 Apex 300 stacked with B300K and/or B500K expansion batteries
Tray size	540 x 340 mm x 40 mm high
Material	Powder-coated steel, black
Mounting	6 mm bolt holes in the base
Tie-down	Strap slots at each end
Brand	12 Volt Direct
Warranty	12 months

What’s included

1 x 12 Volt Direct Apex 300 battery tray

Tie-down straps and mounting bolts are not included.

Simple installation

Three steps

No brackets to build and no special tools. A drill, a few bolts and a strap is all it takes.

1Pick your spot

Choose a flat, solid surface in the tub, canopy, drawer, van or camper. Check there’s room for cables and airflow.

2Bolt it down

Mark and drill through the 6 mm holes and fix the tray with bolts or screws to suit the surface.

3Strap it in

Sit the power station in the tray and run a tie-down strap through the end slots and over the top. Cinch it tight.

Always use a strap

The tray stops your power station sliding, but a tie-down strap through the end slots is what holds it down on rough roads. Straps aren’t included, so use a cam or ratchet strap rated for the weight.

Shop the Bluetti Apex 300 Not sure? Contact our team