Bluetti AC180 / AC180P / Elite 200 / Premium 200 Battery Tray Mount
In Stock - Ready for immediate dispatch or pickup
Pickup Available from Punchbowl, NSW
Buy Now, Pay Later.
DETAILS
Overview
Bolt down.
Strap in.
A made-to-measure steel tray for your Bluetti AC180P & Premium 200 V2. Bolt it into the ute, van or camper, strap the unit in, and it stays put on the roughest roads.
Made for the AC180P & Premium 200 V2
This 12 Volt Direct tray is cut and folded to suit the Bluetti AC180P, Bluetti AC180, Bluetti Premium 200 V2 and Bluetti Elite 200 V2. The base sits flat under the unit and the folded sides stop it sliding around, so your power station rides in one spot instead of bouncing across the floor.
Mount it in the ute tub, canopy, drawer system, van or camper. It’s a simple, solid way to carry a power station without building a custom box around it.
Compatibility
- ✓Bluetti AC180P
- ✓Bluetti AC180
- ✓Bluetti Premium 200 V2
- ✓Bluetti Elite 200 V2
Not suitable for:
- ✕Bluetti AC180T – use TVD-BT02
- ✕Bluetti AC70P / Premium 100 V2 – use TVD-BT05
Tech specs
| Suits | Bluetti AC180P Bluetti AC180 Bluetti Premium 200 V2 Bluetti Elite 200 V2 |
| Tray size | 360 x 260 mm |
| Material | Powder-coated steel, black |
| Mounting | 6 mm bolt holes in the base |
| Tie-down | Strap slots at each end |
| Brand | 12 Volt Direct |
| Warranty | 12 months |
What’s included
1 x 12 Volt Direct AC180P / Premium 200 battery tray
Tie-down straps and mounting bolts are not included.
Simple installation
Three steps
No brackets to build and no special tools. A drill, a few bolts and a strap is all it takes.
Choose a flat, solid surface in the tub, canopy, drawer, van or camper. Check there’s room for cables and airflow.
Mark and drill through the 6 mm holes and fix the tray with bolts or screws to suit the surface.
Sit the power station in the tray and run a tie-down strap through the end slots and over the top. Cinch it tight.
Always use a strap
The tray stops your power station sliding, but a tie-down strap through the end slots is what holds it down on rough roads. Straps aren’t included, so use a cam or ratchet strap rated for the weight.
Shop the Bluetti AC180PNot sure? Contact our teamFeatures
Bluetti AC180 / AC180P Battery Tray Mount Brand: 12 Volt Direct SKU: TVD-BT01
Product Details
| SKU | TVD-BT01 |
| Barcode # | 9359968003846 |
| Brand | 12 Volt Direct |
| Shipping Weight | 2.0000kg |
| Shipping Width | 0.300m |
| Shipping Height | 0.070m |
| Shipping Length | 0.400m |
| Shipping Cubic | 0.008400000m3 |
12 Volt Direct is a 12 V power specialist for the automotive, 4WD, caravan and off-grid industry. When 12V matters, trust the professionals. 12 Volt Direct was built around a simple idea: 12 V systems should be done properly. Its range is designed for the way Australians power their vehicles, carava...
Find Out More
