LPDA Antenna for Cel-Fi – High Gain Wideband [Cable Length: No Cable]
In Stock - Ready for immediate dispatch or pickup
Pickup Available from Punchbowl, NSW
DETAILS
Overview
High gain LPDA antenna
for rural and fringe areas.
A full size welded aluminium log periodic antenna. One antenna covers the main 3G/4G bands on every Australian network with yagi-like gain.

Why LPDA
Yagi gain across every band
A normal yagi is tuned to one band. An LPDA phases a row of elements of different lengths, so it holds high gain across the whole cellular range. That makes it the go-to donor antenna for Cel-Fi repeaters in rural areas.
- ✓Fully welded, black powder coated aluminium
- ✓Stainless steel pole clamp (30-50mm)
- ✓DC ground lightning protection

Compatibility
- ✓Cel-Fi GO and other boosters (outside / donor port)
- ✓Farms, rural homes and remote sites
Not suitable for:
- ✕Vehicles: choose ANT-XA-04
- ✕Short range metro use: the smaller ANT-XA-YG-300 is enough
Tech specs
| Frequency | 698-960 MHz 1710-2700 MHz |
| Peak Gain | 11 / 12dBi |
| VSWR | 2.5:1 or less / 1.8:1 or less |
| Polarisation | Vertical, linear |
| Horizontal Beamwidth | 55° / 42° |
| Vertical Beamwidth | 46° / 34° |
| Impedance | 50 Ω |
| Max Input Power | 50W |
| Connector | N female on 30cm tail |
| Construction | Welded aluminium, black powder coat |
| Mounting | Stainless steel clamp, 30-50mm pole |
| Size | 1240 x 200 x 60mm |
| Weight | 2.2kg |
| Rated Wind Velocity | 192 km/h |
| Operating Temperature | -40°C to +65°C |
| Brand | Xtreme Antennas |
What’s included

- ✓1 x Xtreme LPDA antenna
- ✓1 x Stainless steel mounting clamp
- ✓Cable as per the option you choose (none, 10m or 20m LMR240)
Pole not included.
Simple installation
Use your phone to find the best signal on the roof or wall, usually the highest point facing the nearest tower.
Fix the antenna to a pole or bracket and point it as described below.
Run low-loss cable to the booster outside (donor) port and power up.
Frequently asked questions
Which cable length?
Choose the shortest length that reaches your booster. Every metre of cable loses a little signal.
Which way do I point it?
Elements vertical, aimed at the nearest tower.
Not sure what you need?
Tell us your booster or modem, where you are and what signal you get now, and we will help you pick the right antenna.
Contact our teamFeatures
Xtreme Antennas LPDA Antenna 698-4000 MHz 12/14 dBi Brand: Xtreme Antennas SKU: ANT-XA-YG-LOG-LPDA-PARENTProduct Details
| SKU | ANT-XA-YG-LOG-LPDA-PARENT |
| Brand | Xtreme Antennas |
| Shipping Weight | 5.6700kg |
| Shipping Width | 1.200m |
| Shipping Height | 0.210m |
| Shipping Length | 0.090m |
| Shipping Cubic | 0.022680000m3 |
Xtreme Antennas makes high-performance cellular antennas designed specifically to pair with Cel-Fi smart signal boosters on Australian networks. Xtreme Antennas was created to get the most out of Cel-Fi signal boosters in Australian conditions. Each antenna is designed for the 4G and 5G bands used o...
Find Out More