BLUETTI PV100 FX Flexible Solar Panels | 200W (Set of 2 x 100W)
In Stock - Typically ships in 2-5 business days.
Need it fast? Contact us to confirm lead times.
Pickup currently unavailable.
Buy Now, Pay Later.
DETAILS
Overview
200W of solar that bends to fit
This is a set of two BLUETTI PV100 FX flexible panels, 100W each. They bend up to 240° to follow a curved van roof, boat deck or awning, and weigh only 2.2 kg each.
Monocrystalline cells with up to 23.4% efficiency sit under a tough HPC film, with an EVA layer and a waterproof backsheet. Each panel has standard MC4 leads, and the box includes MC4 branch cables to join the pair.
Fix them with adhesive, or hang them with straps or rope through the corner holes. No drilling needed.
Why buy BLUETTI from us
Your local BLUETTI specialists
Get your panel and power station working together from day one, with advice from a local team.
✓A real shop in Sydney
We’re a bricks and mortar store, not a faceless online warehouse. You can visit us, or pick up your order from our Sydney shop.
✓Talk to a real person in Australia
Call or message our Sydney team (details on our contact page). You’ll speak to someone local who knows BLUETTI, not an overseas call centre.
✓Shipped Australia-wide
We send BLUETTI orders to every state and territory, from the city to the bush.
✓Matched to your power station
We’ll check the BLUETTI PV100 FX suits your power station’s solar input (voltage, watts and plugs) before you buy.
✓Local support after you buy
Questions about setting it up, charging or getting the most from your BLUETTI? Our team here in Australia is happy to help.
✓The whole setup in one place
We stock the BLUETTI power stations, panels, chargers, cables and mounting trays that work together, so you can get everything from one store.
Ask us a questionMake us your first stop for BLUETTI.
Made for the road
Light enough for any roof
At 2.2 kg a panel, the PV100 FX suits motorhome and caravan roofs, boats, rooftop tents and balconies where a glass panel is too heavy or won’t sit flat.
- ✓100W max. per panel, 41.4V open circuit, 3.05A short circuit
- ✓Standard MC4 connectors
- ✓Works with BLUETTI and other power stations or MPPT controllers that take MC4 and suit the voltage
Drill-free install
Stick it, strap it, move it
Use adhesive for a semi-permanent fit, or run straps or rope through the corner holes to hang it from a rooftop tent, awning or rail. It’s quick to take down and move.
Don’t stand on the panels. BLUETTI warns it can damage the cells.
Weather ready
Bends 240°, rated IP67
- ✓Bends up to 240° to fit curved or uneven surfaces
- ✓IP67 water-resistant: handles rain splashes and dust (don’t leave it submerged)
- ✓Operating range -10°C to 65°C, best at 25°C
- ✓HPC film, EVA layer and waterproof LBC backsheet
Frequently asked questions
Is this one panel or two?
Two. You get 2 x PV100 FX 100W panels (200W total), plus two sets of MC4 branch cables.
Will it charge my BLUETTI power station?
Yes, if the unit has a solar input that takes MC4 and suits the voltage. One panel is 41.4V open circuit. Two in parallel stay at 41.4V, which suits 12–60V inputs such as the AC180P, AC70P and Premium 200 V2. Two in series give 82.8V, so only use series on inputs rated that high.
Can I use it with a third-party power station or MPPT controller?
Yes, as long as it uses MC4 connectors and the panel’s voltage and current suit its input.
Is it waterproof?
It’s IP67 water-resistant, so it handles splashes and short exposure to water. Don’t leave it in standing water.
Can I mix it with other solar panels?
BLUETTI doesn’t recommend it, as mixing panels can cut the output of the whole array.
How do I keep it working well?
Wipe off dust and dirt with a soft cloth or a water spray. Don’t scratch the surface.
Still got a question? Our Sydney team is happy to help. Get in touch and you’ll talk to a real person in Australia.
Features
- ✓Set of 2 x 100W flexible panels (200W)
- ✓Monocrystalline cells, up to 23.4% efficiency
- ✓41.4V open circuit, 3.05A short circuit per panel
- ✓Bends up to 240°
- ✓Only 2.2 kg per panel
- ✓1,000 x 590 mm per panel
- ✓IP67 water-resistant
- ✓HPC film, EVA and LBC backsheet
- ✓Standard MC4 leads, branch cables included
- ✓Adhesive or strap mounting, no drilling
Make it a complete setup
Pairs well with
12–60V MC4 solar input: run one panel, or both in parallel.
Solar input takes 12–60V panels with MC4 connectors: suits the pair in parallel.
12–58V solar input with MC4: a light 200W roof setup for a small unit.
5 m MC4 extension so the panels can sit on the roof while the unit stays inside.
Product Details
| SKU | P-PV100FX-US-BK-BL-010 |
| Brand | Bluetti |
| Power | 2 x 100W (200W) |
| Connector | MC4 |
| Open Circuit Voltage | 41.4V per panel |
