BLUETTI PV350 Foldable Solar Panel | 350W
In Stock - Ready for immediate dispatch or pickup
Pickup Available from Punchbowl, NSW
Buy Now, Pay Later.
DETAILS
Overview
350W from one folding panel
One BLUETTI 350W panel does the work of nearly two 200W panels, with one lead to run. It’s a good match for mid-size power stations like the AC180P and AC70P, where a single panel gets you close to their 500W solar limit.
Monocrystalline cells with up to 23.4% efficiency sit under an ETFE coating on a reinforced fibreglass backing. The kickstands set the angle between 35° and 55°, and it folds down to 745 x 785 x 50 mm for travel.
Standard MC4 connectors and 44V open circuit voltage mean one panel suits power stations with a 12-60V solar input.
Why buy BLUETTI from us
Your local BLUETTI specialists
Get your panel and power station working together from day one, with advice from a local team.
✓A real shop in Sydney
We’re a bricks and mortar store, not a faceless online warehouse. You can visit us, or pick up your order from our Sydney shop.
✓Talk to a real person in Australia
Call or message our Sydney team (details on our contact page). You’ll speak to someone local who knows BLUETTI, not an overseas call centre.
✓Shipped Australia-wide
We send BLUETTI orders to every state and territory, from the city to the bush.
✓Matched to your power station
We’ll check the BLUETTI PV350 suits your power station’s solar input (voltage, watts and plugs) before you buy.
✓Local support after you buy
Questions about setting it up, charging or getting the most from your BLUETTI? Our team here in Australia is happy to help.
✓The whole setup in one place
We stock the BLUETTI power stations, panels, chargers, cables and mounting trays that work together, so you can get everything from one store.
Ask us a questionMake us your first stop for BLUETTI.
Fast solar top-ups
More watts, fewer panels
With 350W from a single panel, you get about 1.75 times the energy of a 200W panel. That means faster recharges for your power station on long off-grid trips, in the caravan, or for home backup during an outage.
- ✓One lead to run instead of two
- ✓BLUETTI recommends one panel for the AC180P or AC70P
- ✓Standard MC4 connectors
Set the angle
Adjustable kickstands, 35° to 55°
Fold-out kickstands on the back let you tilt the panel towards the sun through the day, without propping it against the car.
- ✓Folds to 745 x 785 x 50 mm
- ✓Weighs 14.7 kg
- ✓Works from -25°C to 65°C
Built to travel
ETFE and reinforced fibreglass
Durable materials, an ETFE coating and laminated construction help it handle the knocks of camp life. The junction box is IP65 rated.
BLUETTI says not to leave the panel out in rain or snow. It’s not for permanent roof mounting.
Frequently asked questions
Which power stations suit this panel?
Units with MC4-compatible solar inputs whose voltage range covers its 44V open circuit voltage. BLUETTI recommends one panel for the AC180P (500W, 12-60V) and the AC70P (500W, 12-58V). It also suits the Premium 100 V2, Premium 200 V2 and Elite 400 (12-60V each). Two in series would be over 60V, so that only suits higher-voltage inputs like the AC200P L.
Can I use it with a non-BLUETTI power station?
Yes, as long as the power station has MC4 connectors (or you have the right adapter) and supports the panel’s output voltage and current. contact our team if you’re not sure.
Is it waterproof?
The junction box is IP65 rated against splashes, but BLUETTI says not to expose the panel to rain or snow.
Can I mix it with other solar panels?
No. BLUETTI says panels used together should be the same type and rating from one brand.
Can I install it on a roof?
No. It’s a portable folding panel, not a fixed roof panel.
Still got a question? Our Sydney team is happy to help. Get in touch and you’ll talk to a real person in Australia.
Features
- ✓350W rated power
- ✓Monocrystalline cells, up to 23.4% efficiency
- ✓ETFE coating and reinforced fibreglass
- ✓IP65 rated junction box
- ✓Adjustable kickstands, 35° to 55°
- ✓Standard MC4 connectors
- ✓44V open circuit voltage, 11.4A short circuit current
- ✓Folds to 745 x 785 x 50 mm
- ✓14.7 kg
- ✓Works from -25°C to 65°C
Make it a complete setup
Pairs well with
BLUETTI recommends one 350W panel for the AC180P’s 500W, 12-60V solar input.
One panel suits the AC70P’s 500W, 12-58V solar input.
44V open circuit sits inside the Premium 200 V2’s 12-60V, 1,000W solar input.
One panel suits the Elite 400’s 12-60V solar input for top-ups at camp or during an outage.
5 m MC4 extension so the panel can chase the sun while the power station stays put.
Product Details
| SKU | BE-PV350 |
| Barcode # | 6970991290954 |
| Brand | Bluetti |
| Weight | 14.7 kg |
| Connector | MC4 |
| Rated Power | 350W |
| Shipping Weight | 0.5000kg |
| Shipping Width | 0.100m |
| Shipping Height | 0.010m |
| Shipping Length | 0.150m |
| Shipping Cubic | 0.000150000m3 |
BLUETTI is one of the pioneers of portable power, with more than a decade of energy storage development and some of the most-funded power stations ever launched. BLUETTI began in Shenzhen with a mission to provide clean and independent energy for everyone, and has been developing energy storage for ...
Find Out More
