My Vehicle
Cart
12 Volt Direct 24 October 2026

There’s nothing worse than an awning that flaps all night. The wind picks up, the fabric snaps, the arms rattle and nobody gets any sleep. The new Supex awning tie down range is now at 12 Volt Direct, and it’s built to keep your setup steadier at camp.
You can grab a complete kit with everything in one bag, or pick up just the parts you need. Here’s how it all fits together.
Tying down your awning cuts down on movement and wind flap. Less flap means less wear on the fabric and the arms, and a much quieter night. It also stops the awning lifting in a sudden gust while you’re sitting under it.
One thing to keep in mind: tie downs help, but they don’t make an awning safe to leave up in every kind of weather. If strong wind is on the way, roll it in.
Every Supex tie down setup has the same three parts: something to connect to the awning, a line to take the load, and a peg to anchor it to the ground.

Step 1: Connect
Sail track loops slide into the awning’s sail track and give you a strong webbing loop with a metal carabiner. Each loop has 5mm and 7mm splines, so it suits many caravan and 4WD awnings.
No sail track? Barrel bungees wrap around the awning barrel instead. Their soft cover helps avoid marks, and the stretch acts like a shock absorber when the wind gusts.

Step 2: Tension
The reflective guy ropes clip on with a heavy duty carabiner and run down to a peg. Each one is 3.2m long and 6mm thick, and they light up when your torch or headlights catch them, so there are fewer trips over the lines at night.

Step 3: Anchor
Supex screw-in pegs are made for hard ground. With the 13mm drill adapter and a cordless drill, they go in fast and come out just as easy when it’s time to pack up. The heads glow in the dark, so you can find them after sunset.
The easiest way to start is with a kit. Both come packed in a tough canvas bag, so everything stays together between trips.
| Essential (14 pieces) | Ultimate (30 pieces) | |
|---|---|---|
| Reflective guy ropes | 2 | 2 |
| Sail track loops with carabiners | 2 | 2 |
| 30cm barrel bungees | 2 | 2 |
| Hard ground screw-in pegs | 6 x 205mm | 2 x 300mm + 4 x 205mm |
| Screw-in mat pegs | – | 8, with a T40 bit |
| 35cm privacy screen bungees | – | 6 |
| 13mm drill adapter | Yes | Yes |
| Bag | Heavy-duty canvas bag | 400GSM PVC-lined canvas gear bag, 40 x 30 x 14cm |
| Best for | Holding down the awning | The whole campsite: awning, privacy screen and floor mat |
Both kits suit caravan awnings, camper trailers, 4WD awnings, tents and gazebos. Check the fittings suit your setup before you head off.
Already have some gear, or want more tie down points? Every part of the range is sold on its own too.

Strap kit
For a firmer hold, the Awning Tie Down Strap Kit gives you two 270cm heavy duty straps. Fit them with the 5mm or 7mm spline in the sail track, or wrap the D-ring around the awning barrel.

Privacy screens
A privacy screen needs a firm hold, but a little give stops it tearing at the fixing points when it moves in the breeze. Grab the 35cm bungees in a 6 pack for a full screen, or the 60cm bungees in a 2 pack for wider gaps.

Every part of the range, in one place. See more in Straps & Tie Downs.
Tell us about your awning and how you camp, and we’ll help you pick the right kit. Send us a message.