My Vehicle
Cart
12 Volt Direct 28 October 2026

A rooftop tent lid is prime real estate for solar. It’s up high, out of the shade and facing the sky every time you park. The trouble is most 200W panels are long and narrow, so they hang over the edge of the lid or fight with the tent’s own rails.
So we made one that fits. Our 200W low-profile panel is a squarer 1145 x 870 mm, only 17 mm thick, and it pairs with our low-profile brackets for a fit that looks like it came with the tent.
200W
Rated power
1145 x 870
Size in mm
17 mm
Frame thickness
7.98 kg
Panel weight
Most hard shell rooftop tents have a lid somewhere around the size of a roof rack, wider than a typical 200W panel and a lot shorter. A long, skinny panel either sticks out past the lid or forces you to drop down to a smaller, weaker panel.
At 1145 x 870 mm, our panel uses the shape of the lid instead of fighting it. You get the full 200W in a footprint that sits inside the lid’s edges, so the tent still opens, closes and locks the way it should.

17 mm, all black
Most framed solar panels are 25 to 35 mm thick. Ours is 17 mm, with black cells, a black frame and a black backsheet. On a black tent lid or rack it almost disappears, and there’s less panel edge sitting up in the wind.

Brackets
Our low-profile mounting brackets are laser-cut, folded aluminium in black, 500 mm long with a 20 mm lip. The panel frame comes pre-drilled for them, so they pop-rivet straight on with the black rivets in the pack. No drilling the panel, and no chunky Z-brackets lifting it up.
The brackets are sold in pairs and are optional, so you only buy them if they suit your setup. The 1145 mm panel takes two pairs (4 brackets).
The same brackets work two ways, depending on whether your tent has roof rails or you’re mounting to a rack platform.

If you already have a way to mount it, grab the panel on its own. If you want everything in one order, the 1145 mm panel kit adds two pairs of brackets to the panel, and you can change the bracket quantity before you add it to the cart.
| Panel | Size | Best for | Brackets needed |
|---|---|---|---|
| 200W 1145 mm | 1145 x 870 x 17 mm | Rooftop tent lids and shorter racks | 2 pairs (4 brackets) |
| 200W 1480 mm | 1480 x 680 x 17 mm | Longer, narrower roof racks | 2 pairs (4 brackets) |
| 130W 1000 mm | 1000 x 670 x 17 mm | Smaller roofs, canopies and trailers | 1 pair (2 brackets) |
All three are the same 17 mm all-black design and take the same brackets.
See more fixed panels in Fixed Solar Panels.
Tell us which rooftop tent or rack you have and we’ll help you check the panel and brackets suit before you order. Send us a message.
Designed by 12 Volt Direct
200W of solar that fits your rooftop tent.