My Vehicle
Cart
12 Volt Direct
The Starlink Mini runs on DC power, which makes it a natural fit for a 4WD, caravan or boat. There are several ways to power it from 12V, and the right one depends on what you plug into. This guide compares every option, how much battery the Starlink Mini uses, and how to stop dropouts.
The short answer: the Starlink Mini accepts 12 to 48V DC and averages about 25 to 40W. You can run it from a cigarette socket, an Anderson outlet, USB-C PD or an 18V tool battery. On a 12V system, a 12V to 30V booster is the most reliable choice because it stops the dropouts caused by low voltage.
| Your power source | What to use | Good to know |
|---|---|---|
| Anderson outlet or battery box | 12V to 30V booster, Anderson plug | Most reliable 12V setup, inline fuse, IP67 |
| Cigarette or accessory socket | 12V to 30V booster, cigarette plug | Plug in and go, 10A fused plug |
| Built-in caravan or canopy outlet | Waterproof boosted power outlet | 12V or 24V in, 30V out, panel mount |
| USB-C PD power bank or charger | USB-C to DC cable | Needs 20V PD at 65W or more |
| Several sources, one lead | 3 in 1 power lead | USB-C, cigarette and DC5521 plugs on one cable |
| 18V power tool battery | 18V battery adaptor | No 12V system needed, about 2 hours on 5Ah |
| 24V truck or bus | 12/24V cigarette lead | No booster needed, 24V is within range |
A 12V battery reads above 12V when charged, but it falls as it drains and dips further when a fridge or inverter kicks in. Long cables lose more voltage, and the Starlink Mini draws extra power while it starts up. Together these can pull the voltage at the dish below what it needs. A booster turns your 12V into a steady 30V, so the Starlink Mini draws less current and loses less in the cable. Read more in why you need a 30V booster.
| Use | Approx. energy | From a 12V battery |
|---|---|---|
| 1 hour | 25 to 40Wh | About 2 to 4Ah |
| 8 hours (a working day) | 200 to 320Wh | About 17 to 30Ah |
| 24 hours | 600 to 960Wh | About 50 to 90Ah |
Figures are approximate and include a little for conversion losses. Use rises with heating in cold weather and while the dish searches for satellites.
Want it all in one box? The Starlink Mini Travel Bundle includes a booster and cable. Not sure what suits your setup? Ask our team.
Yes, the Starlink Mini accepts 12 to 48V DC. But 12V sits at the bottom of that range, so battery sag, cable voltage drop and start-up peaks can make the Starlink Mini drop out. A 12V to 30V booster gives it a steady supply.
The Starlink Mini averages about 25 to 40W, and draws more while it starts up and finds satellites.
At 25 to 40W, a Starlink Mini uses roughly 2 to 4Ah an hour from a 12V battery, or about 50 to 90Ah over a full day. A 100Ah lithium battery runs it for most of a day before other loads are counted.
Yes, with a USB-C to DC cable made for the Starlink Mini and a USB PD source that supplies 20V at 65W or more. Our 130W car charger has a 100W PD port that suits it.
Usually not. 24V sits comfortably within the Starlink Mini's range, so a 12/24V cigarette lead normally works. Our plug-in boosters are 12V input only, so never plug them into 24V.
Yes. Our 18V adaptors for Milwaukee, Makita, DeWalt and Ryobi batteries run the Starlink Mini with no 12V system. A 5Ah battery gives about 2 hours.