200W Low Profile Roof Solar Kit - 17mm Panel, 2 Pairs of Brackets, 20A MPPT Bluetooth Regulator & Anderson Lead
In Stock - Ready for immediate dispatch or pickup
Pickup Available from Punchbowl, NSW
DETAILS
Overview
200W on the roof,
only 17 mm high.
Our 17 mm low profile 200W panel, two pairs of the brackets made for it, a 20A Bluetooth MPPT regulator and an MC4 to Anderson lead.
Sized at 1145 x 870 mm to sit neatly on a rooftop tent or roof rack.

What’s in the bundle
All black, 17 mm thick, pre-drilled for the brackets.
Two pairs, the number this panel needs. Pop rivets included.
100V input, multi-stage charging, phone app.
4 mm² cable rated 30A, MC4 to grey Anderson plug.
Lowest profile
Brackets made for this panel
Most framed panels are 25 to 35 mm thick. This one is 17 mm, with black cells, frame and backsheet. The brackets pop-rivet straight onto its pre-drilled frame, then bolt between your roof rails or flat on a rack platform.
- ✓Two pairs (4 brackets) included, as this panel needs
- ✓Laser-cut, folded black aluminium
- ✓3.2 mm tempered glass, IP65 junction box

Smart charging

MPPT gets more from the panel
The MPPT regulator tracks the panel’s best operating point to put more charge into your battery than a basic regulator. Check charging and battery status on your phone over Bluetooth.
- ✓Suits lithium, AGM, GEL and lead acid batteries
- ✓Over-voltage, over-current, short circuit and over-heat protection
Compatibility
- ✓Rooftop tents, roof racks and roof rails
- ✓Flat roof rack platforms (brackets flipped)
- ✓12V lithium, AGM, GEL and lead acid batteries
Not suitable for:
- ✕Panels without pre-drilled holes for our brackets (frame drilling needed)
Tech specs
| Panel | 200W monocrystalline, 1145 x 870 x 17 mm, 7.98 kg |
| Panel voltage | Voc 23.5V, Vmp 19.8V |
| Panel current | Isc 11.13A, Imp 10.10A |
| Panel cable | 90 cm, 4 mm², MC4 |
| Brackets | 2 pairs, 500 mm black aluminium, pop rivets included |
| Regulator | MPPT, 100V input, 20A, Bluetooth |
| Adapter lead | MC4 to Anderson, 0.3 m, 4 mm², 30A |
| Panel warranty | 10 years |
| Brand | 12 Volt Direct |
What’s included
- ✓1 x 200W Low Profile Solar Panel (1145 mm)
- ✓2 x Pairs of Low Profile Mounting Brackets with pop rivets
- ✓1 x 20A MPPT Solar Regulator with Bluetooth
- ✓1 x MC4 to Anderson Adapter Lead 0.3 m
Cable from the roof to the regulator and battery, fuses, bolts for your rails or rack, and the battery are not included.
Black Friday bundle. Every item is the same product we sell on its own, with its own full warranty. Each one ships in its own box.
Not sure what you need?
Tell us your vehicle, rack or tent and battery and we’ll check the setup with you.
Contact our teamProduct Details
| SKU | TVD-BUNDLE-SOLAR200 |
| Brand | 12 Volt Direct |
| Shipping Weight | 18.7900kg |
| Shipping Width | 0.910m |
| Shipping Height | 0.070m |
| Shipping Length | 1.180m |
12 Volt Direct is a 12 V power specialist for the automotive, 4WD, caravan and off-grid industry. When 12V matters, trust the professionals. 12 Volt Direct was built around a simple idea: 12 V systems should be done properly. Its range is designed for the way Australians power their vehicles, carava...
Find Out More