Bonnet Mount UHF Antenna Bracket to suit Mazda BT-50 2020-on
In Stock - Ready for immediate dispatch or pickup
Pickup Available from Punchbowl, NSW
Buy Now, Pay Later.
DETAILS
Overview
Your UHF antenna,
on the bonnet hinge.
A vehicle-specific UHF antenna bracket for the Mazda BT-50 2020-on. It bolts to the passenger side bonnet hinge using the existing mounting points, so there’s no drilling and nothing to modify.
Made from a single piece of press-bent 4mm steel with a matte black powder-coated finish. The 18mm hole takes any standard UHF CB antenna, and the cable slot lets you fit or remove the antenna without cutting the cable.
Where it mounts
Made for the Mazda BT-50 2020-on
The bracket picks up the existing bolts on the passenger side bonnet hinge. It’s shaped so the bonnet still opens and closes normally and the wipers aren’t blocked.
- ✓Bolts to the passenger side bonnet hinge
- ✓Uses the existing mounting points, no drilling
- ✓Bonnet opens and closes as normal
- ✓Clear of the window wipers
Compatibility
- ✓Mazda BT-50 2020-on
Not suitable for:
- ✕Mazda BT-50 2011-2019: use APVCBB23
Tech specs
| Suits | Mazda BT-50 2020-on |
| Mounting position | Passenger side bonnet hinge |
| Material | 4mm press-bent steel |
| Finish | Matte black powder coat |
| Antenna mounting hole | 18mm |
| Cable slot | 5mm |
| Brand | Aerpro |
| Part number | APVCBB8 |
What’s included
- ✓1 x Aerpro APVCBB8 bonnet mount UHF antenna bracket
Antenna, antenna base and coax cable are not included. The bracket fits with your vehicle’s existing bolts.
Simple installation
Undo the existing bolts at the passenger side bonnet hinge, sit the bracket in place and refit the bolts firmly.
Fit your UHF antenna base through the 18mm hole and tighten it down.
Slide the coax through the 5mm cable slot and route it into the cabin to your radio.
Goes well with
3.0 dBi heavy duty raydome, short enough for tracks and car parks.
3.0 dBi in a compact 612mm length.
Smart UHF CB radio with Bluetooth, packed with the ATX970S antenna.
Frequently asked questions
Will it fit my antenna?
Yes. The 18mm hole suits standard UHF CB antenna bases from any brand, including Uniden and GME.
Do I need to drill anything?
No. It uses the existing mounting points on the vehicle.
Will it stop the bonnet opening?
No. It’s designed so the bonnet and wipers work as normal.
Can it go on the driver side?
No. Each bracket is shaped for the passenger side hinge of the vehicles listed.
Is an antenna included?
No. This is the bracket only. Choose an antenna and coax to suit.
Not sure what you need?
Tell us your vehicle, model year and antenna and we will check the right bracket with you before you buy.
Contact our teamFeatures
- ✓Vehicle-specific fit for the Mazda BT-50 2020-on
- ✓Passenger side bonnet hinge, uses the existing mounting points
- ✓Single piece of press-bent 4mm steel
- ✓Matte black powder-coated finish
- ✓18mm hole suits all standard UHF CB antennas
- ✓Cable slot to fit or remove the antenna easily
Product Details
| SKU | APVCBB8 |
| Barcode # | 9317114864734 |
| Brand | Aerpro |
| Shipping Weight | 0.3000kg |
